CNG Gas Tank Hot Spinning Machine

Hot /Thermal-Spinning Machine
HFD180 Hot Thermal-Spinning Machine include: Intermediate Frequency Heating Equipment, Thermal-Spinning Forming Machine, Bottom Pushing Machine, etc. Total power for Complete Equipment is about 200Kw, installation area is 13000 x 8000mm

1. Mold of bottom closed(one piece)

2. Mold of head closed(one piece)

3. Head closed spinning wheel(one piece)

4. Slag pouring machine(one set)

5. Intermediate frequency burner(two sets: one set for Ø80- Ø140, one set for Ø140- Ø180)

6. Clamping jaw pad(one set: Ø140)

7. V type frame(two pieces)

1. KGPS-B Thyristor Intermediate Frequency Inverter 1-1, Main Technical Parameter:
Rated Power(KW)     Max Power(KW)      Rated Frequency(Hz)       Power Frequency Voltage(V)     Output Voltage(V)
110                                 250                             2500                                     3N-380                                            750

1-2, Master Control Broad:

Master Control Broad uses imported integrated circuit. Rectifier triggers do not need any adjustment, it has phase sequence to adaptive electric circuit with high reliability. Inverter adapts sweeping-frequency and zero pressure start-up, it has the function of heavy load starting. Frequency tracking circuit using the average sampling programs to improve anti-jamming capability of the inverter. Inverter circuit also added inverter angle regulating circuit, which can automatically adjust load impedance matching.

1-3, Protection and Control:

Master Control Broad internal function includes: Rectifier phase shifting trigger, Phase self-adaption, Inverter trigger, Reverse lead angle lock, Inverter repeat start, Over-current protection, Over-voltage projection, Open-phase protection, Hydraulic under-voltage protection, Control panel under-voltage protection,etc.

1-4, The Standard of Frequency Converter:

ZBK46001-87 Semiconductor Frequency Converter for Induction Heating JB/DQ6367-88 Semiconductor Frequency Converter for Intermediate Frequency Induction Heating, Product Quality Analysis and so on JB4086.85 Technical Condition of Electric Control Equipment for Intermediate Frequency Induction Heating JB/T4280-93 Intermediate Frequency Coreless Induction Furnace

1-5, Water Tank:

Frequency Converter and Capacitor all adopt open return system, it’s better for observation. Cabinet body with water pressure protection device.

1-6, External Power Cord:

External Frequency Power Cord enter from the top of Intermediate frequency power supply cabinet.

1-7, Power Regulating:

There is Power Regulating Knob on the panel of Intermediate Frequency Power Supply Cabinet, the output power of frequency converter is adjustable.

1-8, Main Circuit Connection:

Main circuits of the power supply cabinet are made by copper.

1-9, Color of Cabinet:

Computer spray gray.

C. Cooling Water System(Equipped by user)

3-1, Technique Data:

Cooling water inlet temperature: 5-35℃ Cooling water outlet temperature:≤55℃ Cooling water pressure:0.3—0.4Mpa  Water supply: 0.02835P(P is rated power) (M³/h) Gradient of water return pipe:I-0.01

3-2, Quality Demand of Cooling Water:

PH:7-8.5 Total hardness: ≤10 degree

Available capacity of cooling water pond cannot less than 2~3 times of supplying water.

Leave a Reply

Your email address will not be published. Required fields are marked *