232 406 Neck Spinning Bottom Spinning machine with Press

I. Technical specification

Fire extinguisher hot spinning machine  

Main parameter of machine:

1.Material: 34CrMo4 (35 CrMo),37Mn,30 CrMo.

2.parameter:

A. Diameter φ89-180mm

B. Length 330~1250mm.

C. Thickness 3~6mm.

D. Weight <20kg.

3,Hot spinning machine

3.1 Production cycle::   60 second/pcs (bottom closing and thicken, incl. Loading and unloading time)

3.2 Production cycle:  8second/pcs (mouth closing, incl. Loading and unloading time)

3.3 Total power 58KW, Main motor 30KW – 6 phases.

3.4 Hydraulic system working pressure:5Mpa(low pressure),15Mpa(high pressure)

3.5 Spindle rotation speed 450rpm/min

4. Bottom closing and mouth closing mechanism

4.1 Bottom closing, mouth closing incl. Main machine, main shaft, clamping device, clamping oil cylinder.

4.2 Cylinder rotated device incl. Rotated plate, rotated oil cylinder, rotated supporter (single-arm)

4.3 Loading and unloading mechanism incl. Air cylinder and control elements, the feeding position could be adjusted accordingly, required air source pressure ≥0.5 MPa, air supplying ≥1.0m3/m

4.4 Hydraulic system consists of proportional valve and reversing valve, total power is 22KW

4.5 Electrical cabinet 1 set, operation table 1 set

4.6 Auto-mode and manual-mode could be switched

longterm-hot spinning

Industrial cylinder / CNG cylinder hot spinning machine  

II. Cylinder parameter:

1. Max. Diameter: 406mm

2. Min. Diameter: 232mm

3. Max. Length: 2000mm

4. Min. Length: 800mm

5. Thickness: 5~15mm

III. Machine specification:

1. Machine productivity: Maximum 3 mins per piece (incl. Loading and unloading, mouth necking-in)

2. Machine center height: 1235mm

3. Main shaft motor: 144KW (DC)

4. Slider axial stroke: 65mm

5. Slider radial stroke: 17mm

6. Radial clamping force: 1200KN

7. Main shaft rotation speed: 0-700 rpm

8. DC speed adjuster: Siemens DC driver

9. Mould axial stroke: 450mm

10. Mould axial max. Feeding force: 246.3KN

11. Mould axial max. Feeding speed: 150mm/s

12. Roller rotation angle max. Speed: 25°/S

13. Roller max. Torque: 65KN·m

14. Roller swing angle: 0-100°

15. Hydraulic motor: 90KW

16. Proportional speed control reversing valve: Italy Atos

17. Control method: Siemens 840D

18. Power: 3*380V, 50Hz

19. Pipe ends heating power: 500KW/1000HZ

    longterm-tube closing

    Leave a Reply

    Your email address will not be published. Required fields are marked *